Our 9-LED wheel lights are small and they pack a punch! They are designed to attach to the inside of nearly any brake caliper on all makes and models of bikes. The nine (9) full-size 5mm Cut N’ Click LEDS are arranged in a circle on the outside of the fixture at various angles. This provides a nearly 360° lighting effect, distributing light all around the inside of the wheel. If you have a chrome wheel the effect is absolutely stunning.
Our approach to wheel lighting is different from others who attach lights directly to the wheel using a special power connection unit. We find this approach has a high degree of installation difficulty and leaves a clutter of unsightly wires wrapped around your spokes. During the daytime the beauty of your wheel is lost underneath the attached strips of lights and bundles of visible wires.
Our method is simple, clean looking and effective. You have to look hard to even see our small fixtures attached to the calipers. The black wire is attached to the brake lines as you run it back under your seat for a simple two-wire (single color) or four-wire (multi-color) connection to the remote control and/or switch.
Available colors: Red, Amber, Blue, Green, White, Orange, Pink or U/V Purple
Dimensions: L=1 9/16″ x W=1″ x H=3/8″
Attach with 3M Tape and Promoter
Don’t forget to order 3M tape and promoter to attach your wheel lights to your calipers. Using authentic 3M automotive adhesive tape ensures that these lights will stay where you put them for as long as you own your bike. Price to attach up to 4 wheel lights is $3.39.
If you have steel braided brake lines, you’ll want to order our wheel install kit with steel braid. This kit includes the tape and promoter.
The post 9-LED Wheel Lights appeared first on Boogey Lights.